Home

 Products

Applications

Data Sheets

III Part Specs

ARCAT CSI 3-Part Specs

Details / Drawings

Material Safety Data Sheet

Company Profile


 
 
 
 
   
   
   
 
 
 
 

Description:
An innovative sheet membrane flashing using 2, 3 or 5 oz. copper which is coated with polyester film on one side and bonded to a thick layer of rubberized asphalt on the other.

This encapsulation not only protects the copper, but the rubberized asphalt provides an additional layer of water- proofing. Unlike non-rubberized asphalt which will start to crack over a period of time, the rubberizing significantly increases the longevity of the asphalt coating and therefore the life of the copper flashing. The peel and stick feature make the installation easier and more economical over traditional copper composites. Copper AQUA FLASH has a warrantied longevity.

Uses:
Thru-Wall, Base, Spandrel, Parapet, Foundation Sill, Head and Sill, and Deck flashing and Termite Barrier. Can be applied to concrete, pre-cast concrete, masonry, steel, wood.

Composition/Materials:
A 40 or 50 mil thick copper sheet membrane flashing consisting of either a 2, 3 or 5 oz. solid sheet of copper which is laminated on one side with polyester film and bonded on the other with a highly adhesive bitumen with a release liner.

Sizes:
Standard roll width: 6", 12", 16", 18", 24", 36" Standard roll .length: 50 lineal feet. Custom sizes are available

Aquaflash Mastic:
A specifically formulated mastic to be used in conjunc- tion with Aquaflash and Copper Aquaflash. Used to seal all horizontal terminations, seams, laps, joints and around protrusions.

Packaged in quart tubes or 5 gallon containers.

www.fiberwebflashing.com | fiberweb@verizon.net | © 2010 Clark/Hammerbeam Corp.