Home

Products

Applications

 Data Sheets

III Part Specs

ARCAT CSI 3-Part Specs

Details / Drawings

Material Safety Data Sheet

Company Profile


 
 
 
 
   
   



   
 
   

Description
An inert, lightweight, flexible fiberglass reinforced polyester film membrane. With its reinforced construction, Fiberweb 210 is a strong and highly efficient vapor barrier (MVT: rate .0007) which resists alkalis and caustics found in concrete. It is Virtually impervious to degradation under most conditions. Its strength and durability make it ideal tor underslab vapor barrier applications.

Fiberweb 210 to Tape:
A polyethylene tape with a rubberized asphalt based adhesive used to seal afllaps and seams.

Product Composition:
Fiberweb 210 is a combination of a black polyester film reinforced with fiberglass scrim and vinyl film; average thickness is 8 mils. The adhesive used in the lamination process is virtually indestructible resulting in extra high resistance to delamination.

Technical Data:
"Mylar" polyester film is made from polyethylene terephthalate, the polymer formed by the condensation reaction of ethylene glycol and terephthalic acid. Its unusual balance of properties enables it to serve specific engineering functions as a physical barrier in protective coatings and as a structural, thermal and electrical barrier.Polyester film contains no plasticizers and therefore does not become brittle with age at its normal operating conditions.

Application Instructions:
Prepare subbase of slabs on grade by leveling and compacting to provide a smooth surface. Apply Fiberweb 210 over the full surface of the subbase. Lap joints a minimum of 6 inches and tape with the Fiberweb 210 Tape. Carefully place reinforcing over vapor barrier using reinforcing chairs with flat bases to support the reinforcing.

Product Information:
Sizes:
Fiberweb 210 is available in width of 36", 54", 72"
Standard length is 300 lin.eal feet.
Fiberweb 210 Tape is available in 2 112" Width
Standard length is SO lineal feet.

Technical Data Table - Fiberweb 210

Property

Average Values

Test Method

Moisture Vapor Transmission

0.0007 Perms

ASTM E96 Procedure E

Tensile Strength (lbs/1" width)

 

ASTM D828

MD

103.1

 

CMD

120.4

 

Tensile Strength (ps)

 

ASTM D828

MD

11.855

 

CMD

13.833

 

Puncture Resist.. Beach Units

100

ASTM D781

Tear Strength (Mullen Burst)

214.6 Ibs/inch

ASTM D751

Reat Resistance

 

ASTM D1004-66

MD

1454 Ibs/inch

 

CMD

1532 Ibs/inch

 

Elongation

5.67%

ASTM D412-68

Cold Temperature Rex

No crack or peel

1/8" mandrel @ .100F

Shrinkage

0.01%

ASTM D1204

Adhesive Strength (tape to steel)

45 oz/in. width

ASTM D3330

Asphalt Exposure

No change

30 days @ 160F